STARK ROTARY SWEEPERS, RSW-S -MODELS 1
STARK ROTARY SWEEPERS, RSW-S -MODELS 2
STARK ROTARY SWEEPERS, RSW-S -MODELS 3
previous arrowprevious arrow
next arrownext arrow
STARK ROTARY SWEEPERS, RSW-S -MODELS 1
STARK ROTARY SWEEPERS, RSW-S -MODELS 2
STARK ROTARY SWEEPERS, RSW-S -MODELS 3
previous arrow
next arrow

General information

With the STARK Rotary sweeper, you can clean areas of all sizes effortlessly and cost-effectively both in summer and winter. The rotary sweeper can be used on tractors, tool carriers and wheel loaders.

Thanks to its low structure, the operator has an unobstructed view to the area that is being cleaned, which improves work safety.

STARK RSW -Rotary sweepers, S-models have separate turning frame, which keeps the brush roller straight at all turning angles. The SUNLINE 900 mm lamellas, vertical (250 mm) and horizontal float (12 °) guarantee a finished brushing mark even on uneven work sites. The large 30 ° turning angle allows brushing right next to walls, railings, etc. 900 mm lamellas are the most cost-effective option. The spring and gas shock absorbers hold the brush roller firmly to the surface to be brushed.

The rotation speed can be adjusted steplessly, and the direction of rotation can be changed with the optional valve.

The hydraulic motor is integrated inside the brush roller for protection against impacts. The coupling with a buffer protects the hydraulic motor of the brush roller in the event of start-up and collisions.

STARK RSW -Rotary sweepers, S-models feature bolt-on STARK FIT adapters that can be easily replaced to fit the base machine.

The SUNLINE 900 mm lamellas are standard in the open brushes S-models.

The long life of the STARK attachment is guaranteed by the STARK service.

Product data sheet

Applicability

Applicability of rotary sweeper RSW-S model

Technologies

Stark FIT

STARK FIT

The STARK FIT is a tool attachment system that enables quick attachment between different basic machines.

Thanks to carefully designed sizing, the STARK FIT allows the use of more than 50 different adapters on the same implement. This increases the versatility and resale value of the implement.

Due to its rugged dimensions (16 pcs x M 24), it is also suitable for installing the largest implement mounts.

900 LINE - Stark

900 Line

Bristles with an increased diameter of 900 mm. Faster and more efficient cleaning. Longer wear life compared to standard 700 mm bristles.

Requirements for hydraulics

Connection with at least two hoses, at least one double-acting hydraulic block, oil flow must be 55-120 l/min (S models).

Standard Equipment

Hydraulic brush swivel by separate turning frame, quick-release brush roll, flow control valve, plastic mudguard, support legs, SUNLINE 900 mm lamellas, attention label. Several valve options, numerous STARK FIT fitting options, various hydraulic quick couplings.

Additional/optional equipment

High-pressure dust binding system with hydraulic Dynaset water pump, directional high-pressure nozzle hose, low-pressure watering system with 12 or 24V water pump, directional low-pressure nozzle hose, 2- or 4-hose hydraulics, reverse valve 12 or 24V for brush roller.

Adapters

STARK FIT

Instruction and service manual