English

Strongly chosen - since 1980 - STARK

STARK Rear Sweepers 2,5 & 3 m

VIDEO - Attachment in operation

Takaharja
Play Video about Takaharja

Looking for quality?

STARK - Strongly chosen
STARK REAR SWEEPER 2,5 AND 3 M 1
STARK REAR SWEEPER 2,5 AND 3 M 2
STARK REAR SWEEPER 2,5 AND 3 M 3
STARK REAR SWEEPER 2,5 AND 3 M 4
STARK REAR SWEEPER 2,5 AND 3 M 5
STARK REAR SWEEPER 2,5 AND 3 M 6
previous arrowprevious arrow
next arrownext arrow
STARK REAR SWEEPER 2,5 AND 3 M 1
STARK REAR SWEEPER 2,5 AND 3 M 2
STARK REAR SWEEPER 2,5 AND 3 M 3
STARK REAR SWEEPER 2,5 AND 3 M 4
STARK REAR SWEEPER 2,5 AND 3 M 5
STARK REAR SWEEPER 2,5 AND 3 M 6
previous arrow
next arrow

General information

The STARK rear sweeper is designed for use in a tractor back lifting device for stable brushing of, for example, sidewalks, junctions, and skating rinks.

The rotational force of the rear sweeper is obtained mechanically from the power take-off (PTO) via the universal joint shafts. The rear sweeper swivels hydraulically 15 °on both sides. In addition, the support wheels ensure steady movement while brushing, minimizing jumping of the device.

Alternatively, the rotational force is obtained from a hydraulic motor. On models with a hydraulic motor, the speed can be infinitely adjusted.

The rear sweeper comes standard with BEELINE 700 mm convoluted lamellas. Smaller THM 2500 and THM 3000 models feature 700 mm lamellas and the largest THM 4500 model SUNLINE 900 mm lamellas.

A watering system 255 l with 12 or 24 V electric pump is available as an accessory for the rear sweepers.

The long life of the STARK attachment is guaranteed by the STARK service.

Product data sheet

Applicability

Applicability of rear sweeper 2,5 and 3 m

Requirements for hydraulics

STARK TH -models -connection with 4 hoses, two double-acting hydraulic blocks on base machine required.

STARK THM -models -connection with 2 hoses, one double-acting hydraulic block on base machine required.

Standard Equipment

Fixed three-point adapters (cat. 2), PTO shafts, BEELINE 700 mm lamellas, brush hydraulic turning, quick fastening brush roller, large support wheels, brush height adjustment, flow control valve, plastic mudguard, support leg, attention label. Various hydraulic quick couplings.

Additional/optional equipment

Watering system 255 l with 12 or 24 V electric pump.

Instruction and service manual

Project products are work machines built based on a client’s demands. Products can be modified for various standard machines or work sites.