STARK excavator sweeper 100
STARK excavator sweeper 101
STARK excavator sweeper 102
Stark Excavator Sweepers 5
STARK excavator sweeper 105
Stark Excavator Sweepers 8
STARK excavator sweeper 106
STARK excavator sweeper 107
STARK excavator sweeper 108
previous arrowprevious arrow
next arrownext arrow
STARK excavator sweeper 100
STARK excavator sweeper 101
STARK excavator sweeper 102
Stark Excavator Sweepers 5
STARK excavator sweeper 105
Stark Excavator Sweepers 8
STARK excavator sweeper 106
STARK excavator sweeper 107
STARK excavator sweeper 108
previous arrow
next arrow

General information

The STARK excavator sweeper can be attached to excavators or other machines with a separate boom, and it can be used to clean hard-to-reach areas such as fence backsides.

The excavator sweeper is also ideal for cleaning railways.

The working width of STARK excavator sweepers ranges from 0.6 to 2.5 m, with SUNLINE 900 mm lamellas as standard, ensuring an excellent finish also on uneven surfaces.

The following adapters can be attached to the device to make it fit the base machine boom: S-30 to S-60 adapter, NTP-5, -10 or -20.

The long life of the STARK attachment is guaranteed by the STARK service.

Product data sheet

Applicability

Applicability of excavator sweeper

Technologies

Stark FIT

STARK FIT

The STARK FIT is a tool attachment system that enables quick attachment between different basic machines.

Thanks to carefully designed sizing, the STARK FIT allows the use of more than 50 different adapters on the same implement. This increases the versatility and resale value of the implement.

Due to its rugged dimensions (16 pcs x M 24), it is also suitable for installing the largest implement mounts.

900 LINE - Stark

900 Line

Bristles with an increased diameter of 900 mm. Faster and more efficient cleaning. Longer wear life compared to standard 700 mm bristles.

Requirements for hydraulics

Requirements for hydraulics: connection with two hoses, one double-acting hydraulic block, oil flow must be 55-120 l / min (pressure max 300 bar, return lines counter pressure max. 100 bar).

Standard Equipment

Quick-release brush roller, SUNLINE 900 mm lamellas, flow control valve, support legs / frame. Several valve options, numerous fitting options, various hydraulic quick couplings.

Additional/optional equipment

Fender, flow restrictor valve (compulsory if the flow exceeds 120 l/min), water nozzle line, High-pressure dust binding system.

Adapters

S-30, S-32, S-40, S-45, S-50, S-60, NTP 5, NTP 10, NTP 20.

Instruction and service manual