Stark collecting sweeper, CSW-models
VIDEO - Attachment in operation
General information
Stark’s collecting sweeper CSW is the world’s only truly collecting sweeper designed for professional use for cleaning streets and yards. The design has emphasized the efficiency and user-friendliness of the device: excellent visibility makes work more efficient and increases the safety of the driver and other road users.
The excellent sweeping result of the collecting sweeper is based on the counter-clockwise direction of rotation of the main brush, three support points and unique floating solutions. CSW floats vertically, horizontally and lengthwise, thanks to which the sweeper follows the contours of the substrate perfectly. The large-rimmed front tire also dampens and precisely follows the surface to be brushed, and the rear tires bring stability to the use of the brush device.
The height of the brush roller can be infinitely adjusted.
User-friendliness is increased by the large-sized waste hatch, which enables efficient emptying of the waste container. The PUR seal of the waste hatch and the wear blade below increase tightness while protecting the hatch, and the mechanical lock of the waste hatch is reliable, extending the lifespan of the hatch at the same time.
The side brushes of CSW models enable efficient cleaning of the sides of buildings and curbs. They give the device a very wide working width of almost 3.5 meters. The angles of the side brush are adjustable, enabling the best possible brushing result for the application, and the hydraulic lifting of the side brushes increases efficiency and safety. Thanks to the Plug & Play hydraulic block, it is easy to add side brushes also as a retrofit.
The patented Ecoline brush lamellas used in the brush devices significantly increase the lifespan of the lamellas.
The Stark Fit bracket system enables a quick change of the work equipment bracket.
The brush device’s accessory, high-pressure dust binding, consumes less water and binds the dust in the water mist. Distributing water through the manifold enables freely positioned and directional nozzles. The huge 600 l water tank guarantees uninterrupted work.
The optional high-pressure washer & 15 m self-winding hose reel enable smooth working.
Thanks to the electrically controlled hydraulic block, all this is possible with a 2-hose system.
The long life of the STARK attachment is guaranteed by the STARK service.
Product data sheet
Applicability
Technologies
900 Line
Bristles with an increased diameter of 900 mm. Faster and more efficient cleaning. Longer wear life compared to standard 700 mm bristles.
DBS Dust binding system
The STARK DBS Dust binding system is the most efficient system in the market for containing dust generated while sweeping. A large water tank and high-pressure nozzles with free alignment and placement make the STARK DBS system a unique technology.
The hydraulic high-pressure pump turns water into dense mist, binding the dust generated from the swept surface. The mist also binds fine dust particles and consumes less water while minimising hardened dust accumulation in sweeper structures, decreasing fuel consumption and improving work efficiency.
The DBS Dust binding system enables sweeping in population centres and urban areas where street dust is more hazardous.
STARK FIT
The STARK FIT is a tool attachment system that enables quick attachment between different basic machines.
Thanks to carefully designed sizing, the STARK FIT allows the use of more than 50 different adapters on the same implement. This increases the versatility and resale value of the implement.
Due to its rugged dimensions (16 pcs x M 24), it is also suitable for installing the largest implement mounts.
SWEEPER FLOAT SYSTEM 2.0
The SWEEPER FLOAT SYSTEM enables perfect sweeping results even on uneven surfaces.
The implement frame is vertically, laterally and longitudinally free-floating (images 1, 2 and 3). The brush roller also floats freely within the implement frame.
These features ensure the best sweeping performance in the world.
Requirements for hydraulics
The CSW collecting sweeper needs a continuous flow of oil from the base machine. Hydraulics connection either 1 pc to the engine hydraulics or 1 pc to the dual function (2 hoses) block.
Minimum oil flow 50 l/min (CSW 2000) and 60 l/min (CSW 2500).
Hydraulics control with a separate wired controller, RAM bracket and suction cup in the controller. The controller takes power from the 12/24V power supply of the cab (the so-called cigarette lighter)
Standard Equipment
Vertical, horizontal and longitudinal flotation, block hydraulics, mechanical locking of the hydraulic bottom hatch, sturdy support wheels.
Additional/optional equipment
Side brushes left and right, Dust binding system, Watering system ( 12 /24V) high pressure washing gun with 15m hose reel.
Adapters
STARK FIT