STARK Bucket Sweepers, BSW-models
VIDEO - Attachment in operation
General information
STARK bucket sweepers are designed for areas where high cleaning power and durability are required of the sweeper unit, such as streets, yards, industrial areas, ports, and sorting centers.
The bucket sweeper can be used on tractors, tool carriers and wheel loaders.
The STARK Bucket sweeper BSW-Model is specially designed for use with a wheel loader. It boasts a large waste bin and 900 mm lamellas, which makes it high-performing and adds to the sweeping quality.
The robust STARK Bucket sweepers, BSW-Models withstand wear and shocks.
Bucket cutting edge is made of 500 HB wear steel, boltable wear blades and edge wear pieces protect the bucket from wear.
SUNLINE 900 mm lamellas improve the work surface on uneven brushing areas.The large hopper volume reduces emptying intervals. The optional PIN FLOAT floating frame improves efficiency and increases operating comfort.
The hydraulic motor is integrated inside the brush roller for protection against impacts. The coupling with a buffer protects the hydraulic motor of the brush roller in starting and collision situations.
The large opening angle of the brush roller allows a full unloading angle directly on the platform. When the brush roller rises, the bucket can also be turned straight down when tipping onto the platform.
Infinitely adjustable brush height and support rollers improve efficiency and increase operating comfort.
Cleaning performance and dust binding properties can be further enhanced by equipping the watering system (available as an accessory) with tanks.
Operating principle of the Bucket sweeper:
- When driving forward, the bucket sweeper easily collects even larger pieces, such as pieces of board, boulders or pieces of plastic.
- When driving backwards with the bucket sweeper, you can finish the brushing result by collecting even finer material.
Product data sheet
Applicability
Technologies
Sweeper Float System
Sweeper Float System technology allows the implement to float freely without the implement being controlled by the base machine.
Floating is effected by means of pins, sleeves and floating slots in the implement frame (Figures 1. and 3.). The studs have greasing which improves the rotation of the hardened sleeves and significantly reduces wear. The implement can float freely along the surface in height and lateral direction (Figure 2.).
Sweeper Float System technology also enables longitudinal flotation (Figure 3.).
These features ensure excellent brushing performance.
STARK FIT
The STARK FIT is a tool attachment system that enables quick attachment between different basic machines.
Thanks to carefully designed sizing, the STARK FIT allows the use of more than 50 different adapters on the same implement. This increases the versatility and resale value of the implement.
Due to its rugged dimensions (16 pcs x M 24), it is also suitable for installing the largest implement mounts.
900 Line
Bristles with an increased diameter of 900 mm. Faster and more efficient cleaning. Longer wear life compared to standard 700 mm bristles.
DBS Dust binding system
The STARK DBS Dust binding system is the most efficient system in the market for containing dust generated while sweeping. A large water tank and high-pressure nozzles with free alignment and placement make the STARK DBS system a unique technology.
The hydraulic high-pressure pump turns water into dense mist, binding the dust generated from the swept surface. The mist also binds fine dust particles and consumes less water while minimising hardened dust accumulation in sweeper structures, decreasing fuel consumption and improving work efficiency.
The DBS Dust binding system enables sweeping in population centres and urban areas where street dust is more hazardous.
Requirements for hydraulics
Connection with at least two hoses, at least one double-acting hydraulic block, oil flow must be 55-120 l/min.
Standard Equipment
900 mm SUNLINE lamellas, Support rollers, Saving blades 500 HB, quick-release brush roll, brush roll hydraulic lift by two cylinders, stepless brush height adjustment, plastic fender, flow control valve, attention label. COMBI Hydraulics (brush rotation and brush lifting with 2 hoses), 4- hose hydraulics (separate brush rotation and brush body lifting), programmable hydraulics (5 functions) + control unit for cab, Stark Fit, various hydraulic quick couplers.