STARK RELAX V-plows for under 6 t machines

VIDEO - Attachment in operation

Looking for quality?

Nivelaura_002_LOWRES

Nivelaura_007_LOWRES

Nivelaura_001_LOWRES

STARK RELAX V-PLOWS FOR under 6 T 1

STARK RELAX V-PLOWS FOR under 6 T 2

Nivelaura_009_LOWRES

Nivelaura_005_LOWRES

Nivelaura_013_LOWRES

Nivelaura_008_LOWRES

Nivelaura_003_LOWRES

General information

The STARK RELAX articulated plow is the most versatile snow plow on the market. The RELAX articulated plow is suitable for cleaning yards, roads and forest roads.

Thanks to the patented RELAX blade release mechanism, the plow can also be used to remove packed snow. The RELAX articulated plow can be attached to property care machines, tractors and wheel loaders.

The plow boasts excellent snow removing properties, thanks to the optimal wing geometry and large turning angle. It´s structure, advanced floating properties and optimized weight also make it stable and easy to push.

With the RELAX articulated plow, heavy snow can be cleared efficiently off footpaths, cycleways and forest roads. The blades of the articulated plow turn ± 35 °, making snow removal easy and effortless.

The plow exploits FLOATING FRAME technology to enable vertical and horizontal floating, which ensures smooth plowing result even at high speeds. When plowing, the plow slides steadily on the rotating and infinitely adjustable support legs.

Thanks to the RELAX blade system, the blade remains locked during plowing, resulting in a smooth surface and significantly less packed snow. When the blade hits an obstacle, the blade system lock is released, the blade body turns backwards, and the blade gets over the obstacle. This protects the driver, the attachment, and the base machine from collision damage. A plow with a RELAX blade system can be pushed forcefully against the ground to remove packed snow.

The articulated plows are equipped with bolted edge wear pieces that allow plowing against the curbs of the street. With a set of bolt-on STARK FIT adapters, the plow can be swiftly attached to different base machines.

A wide range of hydraulic options is available for RELAX articulated plows. The four-function valve, available as an option, adds to plowing efficiency on roads and yards. With the four-function valve the plow blades can be moved diagonally. In addition, the four-function valve enables a simultaneous forward and backward movement of the plow blades.

The long life of the STARK attachment is guaranteed by the STARK service.

Product data sheet

Applicability

Technologies

RELAX – UNIQUE PATENTED BLADE SYSTEM

The RELAX blade system keeps the plow blades locked. The plow´s trace is smooth and the formation of the packed snow is considerably less.
When the blade strikes an obstacle, the blade system lock is released, the blade body turns backwards and the blade passes over the obstacle. This protects the driver, implement and base machine from collision damage.
The plow with the RELAX blade system can be pressed against the plowed surface, which allows removal of the packed snow.

How the RELAX blade system works:

The blade body is mechanically locked by three joints (Figure 1.).
As the load increases, the lock is released and the blade body makes a rapid and extensive evasive movement (Figure 2.).
When the load is released, the spring returns the blade body back to the lock (Figure 1.).
The blade release force can be infinitely adjusted by changing the angle of the joints (Figure 3.).

The greater the angle between the joints (Figure 1.), the lighter the lock will open. WHEN TIGHTENING THE NUT the release force DECREASES, WHEN LOOSENING THE NUT the release force INCREASES (Figure 3.).

FLOATING FRAME

FLOATING FRAME -technology gives you a very good working result.
The float closely follows the ground, the sliding plates and the positioning of the float reduce the bouncing of the unit during work. The implement can float vertically and horizontally (Figure 1.) without the implement being controlled by the base machine.

The float is positioned at the implement mount, which also allows the payload of the swivel frame and a good focus on the implement (Figure 2.). The sliding plates are maintenance-free (no lubrication required) and dampen plow bounce (Figure 3.).

STARK FIT

The STARK FIT is a tool attachment system that enables quick attachment between different basic machines.

Thanks to carefully designed sizing, the STARK FIT allows the use of more than 50 different adapters on the same implement. This increases the versatility and resale value of the implement.

Due to its rugged dimensions (16 pcs x M 24), it is also suitable for installing the largest implement mounts.

Requirements for hydraulics

Connection with at least two hoses, at least one double-acting hydraulic block.

Standard Equipment

RELAX, FLOATING FRAME and STARK FIT technologies, articulated rubber, support legs, rotating ball-jointed support plates, edge wear pieces, reflectors, attention label. Various valve options, several wear blade and adapter options, various hydraulic quick couplings, LED light kit.