STARK Bucket Spreaders
VIDEO - Attachment in operation
General information
ALSO SUITABLE FOR SALTING.
The STARK bucket spreader is designed for effective prevention of slipperiness on open areas and roads. Application of dust-binding salt is also possible thanks to the compact construction and PRECISE SPREAD technology. With the STARK bucket spreader, prevention of slipperiness is precise and cost-effective. The STARK bucket spreader can be used on 2-25-ton tractors, property care machines and wheel loaders and is attachable both to the front or rear end of the base machine.
High-strength structural steel, robot-welded construction, frame stiffener housings, unencapsulated bucket inner surface, bucket support and 3-point support inside the bucket make the bucket spreader strong, functional, and high-performing. All bucket spreader models feature a crushing shaft, which shreds icy or piled sand, and spreading bar guards that prevent large stones and ice from entering the spreading roller.
Thanks to PRECISE SPREAD technology, sand or other anti-slip material can be spread evenly and accurately. The amount of material to be spread is controlled by an infinitely adjustable flow control valve. Small wear pieces, placed in the form of a spiral in the spreader roll, distribute the sand continuously and evenly. The compact design, the enclosed motor and the recessed bearings ensure the best possible working width with smaller blind areas. Sand spreading is also possible next to the walls and in tight spaces.
STARK bucket spreaders are available for base machines of all sizes, with a water volume of 560 litres up to 3,000 litres. The bucket spreaders feature bolted STARK FIT adapters that are easily changeable to fit different base machines. The STARK bucket spreader is easy to maintain: greasing of bearings and chain as well as chain adjustment can be done without opening the guards.
With a filling cylinder, which is available as an accessory, the bucket can be used to pick up sand directly from the heap (only when mounted on the tractor lifting device). Hot-dip galvanizing, also available as an accessory, protects the tank from corrosion.
The long life of the STARK attachment is guaranteed by the STARK service.
Product data sheet
Applicability
Technologies
PRECISE SPREAD
PRECISE SPREAD is a technology that can be used to spread anti-slip material very smoothly and accurately.
The hydraulic flow regulator can be used to continuously adjust the rotation speed of the sanding roller and crusher shaft (Figure 1.). The crusher shaft breaks the frozen material and moves it toward the scattering opening (Figure 2.).
The small, spiral-welded sanding roller wear pieces (Figure 2.) provide continuous, smoother, more accurate scattering of the material. The compact design, the motor housing and the bearing arrangement ensure the maximum effective width (Figure 3.). There are fewer pavement areas, and sanding is also possible near wall and narrow spaces.
The compact structure of the sanding roller is leak-proof and even allows the application of flake salt.
STARK FIT
The STARK FIT is a tool attachment system that enables quick attachment between different basic machines.
Thanks to carefully designed sizing, the STARK FIT allows the use of more than 50 different adapters on the same implement. This increases the versatility and resale value of the implement.
Due to its rugged dimensions (16 pcs x M 24), it is also suitable for installing the largest implement mounts.
Requirements for hydraulics
Connection with two hoses, requires one double-acting hydraulic block.
Standard Equipment
Cutting edge made of wear steel (500 HB), crusher shaft, protective bar, double pressure safety valve, flow control valve, attention label. Several valve options, various hydraulic quick couplings.
Additional/optional equipment
Filling cylinder with shut-off valve, hot-dip galvanizing.
Adapters
More than 50 different types of adapters.
